KINCO 2M2280N Stepper Driver

النوع : 2M2280N Stepper Driver
حالة التوفر : 1

High performance, multiple functions, simple operation, cost-effective; 
Automatic parameter adjustable regulation, ensures motor run at optimal performance; 
Supporting driver test running function; 
Supporting phase memory function, driver will record phase position of motor during motor stop to ensure motor not shake when re-power; 
With step smooth filter, can smooth input pulse and reduce the transient motion of motor, make sure motor run more smoothly; 
Supporting automatic half current function of motors in statically locked status, which can greatly reduce heat dissipation of the motors; 
Automatic internal high-subdivision conversion technology ensures motor run at optimal subdivision state; 
Opto-isolation ERR signal output with max. current of 10mA; 
Opto-isolation signal input, with pulse response frequency up to 400KHz.

Dimensions (Unit:mm)


Technical Specifications


Model 2M2280N
Input voltage 220V AC±15% (50Hz)(187~253VAC)
Over-voltage protection 395VDC
Under-voltage protection 200VDC
Output current 4.5 / 5 / 5.5 / 6A / 6.5 / 7 / 7.5 / 8, 8 settable values in total. (Unit: A)
Micro step 2/ 4/ 5/ 8/ 10/ 16/ 20/ 32/ 50/ 64/ 100/ 128, total 12 subdivisions.
Adaptable motor 110 / 130 series 2-phase hybird stepper motor
Input signal PLS(CW), DIR(CCW), A/B, FREE; 
Voltage:5V;Current:6 ~ 16mA;
(when the voltage is 24V,there must be a resistance of 2K)
Control signal mode Pulse control:PLS+DIR, CW/CCW, A+B
Output signal ERR, open collector output, maximum current:10mA
Automatic half-current The driver will reduce phase current of the motor by a half in 1.5 seconds
Protection Over-voltage, under-voltage, short circuit and overheat protection
Dynamic braking circuit* Absorb regenerated energy of motor by connecting to power resistor. Custom function


Environment specification


Cooling method Fan cooling
Operation environment Avoid the environment with great amount of metallic powder, oil mist, or erosive gases
Operation humidity <85%, RH (non-condensing or water drops)
Operation temperature 0℃ ~ +40℃
Storage temperature -20℃ ~ +70℃
Weight (net) 1.5Kg
Dimensions 201 x 147 x 66 mm
Ingress protection IP20

* Please confirm with factory for custom of driver with dynamic braking circuit.


كتابة تعليق

انتبه: لم يتم تفعيل اكواد HTML!
رديء           ممتاز

تعليقات فيس بوك ()